Tag Archives: Compound Miter Saw

Compound Miter Saw

Choosing A Sliding Compound Miter Saw For Fine Woodworking

The Sliding compound miter saw tops the list of woodworking tools which can make smooth and accurate angled cuts used in everything from fine cabinet work to home construction. Its lower cousins include cut-off saws, so-called “chop saws” and any miter saw with no slide.

Do you The professionals of picking a 12″ machine more than a 10″ unit are cutting height and thickness and more power. The benefit of a 10″ version is reduced weight and lower price. If a 10″ saw will make all the cuts you can imagine making in your store or on the work site, by all means pick the more compact design. Most features and overall quality will be identical or similar within any specific brand.

Obviously, features like maximum height Of cut, maximum depth of cut, weight and horsepower will be different and you can see those differences clearly when several machines are contrasted side-by-side.

The apparent advantage of a sliding compound Miter saw over a standard model (with no slide) is that you may crosscut wider lumber in one pass. A chop cut will always provide you with a nicer, smoother effect but on wider timber, you might have to push-through too and that’s what the miter saw slide makes possible.

There Which saw you select will depend mostly on what you intend to do with it. If you’re searching for a permanently bench-mounted saw in a woodworking shop, you do not have to concern yourself so much with weight and size. However, if you’re planning to bag your miter saw to and from and around various job sites daily, weight and size will become very important as will a well-located carrying handle.
Exception) are priced in the same area and consequently, if you’re comparing models, price shouldn’t be a consideration. Concentrate on the features which are most important to you because, this manner, there may be significant differences between machines.

Going to use your saw for? If you are simply going to be creating repetitive crosscuts into 2 x 4 timber, just about one of these machines will suffice. You may, however, would like to select one with soft start and an electronic brake. If, on the other hand, you’ll be making seriously accurate cuts into expensive hardwoods or crown molding, it would seem that precision, micro fine adjustment controls with digital LCD readout, large vertical height capacity and an fantastic laser may top your list of prerequisites. Is the laser flexible to left or right of the blade? 1 version even features dual lasers, one down each side of the blade, clearly and correctly marking out the kerf that the blade will make before the cut is made.

Other important considerations Consider how far, left and right, these alterations can be made. Occasionally, 45 degrees just isn’t enough of an angle. Look how easily and correctly these alterations can be made on all those woodworking tools. Can you create a cut close, but not on a detent?

What Kind of blade includes the instrument and what size is your arbor hole? If the solution is something other than 5/8″ or 1″, you might be locked into purchasing your blades straight from the saw manufacturer and you may well find superior blades elsewhere. Usually, when I buy a miter saw, I discard the blade and replace it with one which will make the smoothest, most precise cuts potential such as the Forrest Chopmaster. The extra expense is completely worth it if you’re making seriously accurate joints in fine hardwoods or crown molding. If you are simply producing rough cuts to fir for framing, you may want to consider a blade with fewer teeth and a more aggressive cut.
Accomplished with every saw? Does the vent match the hose in your shop vacuum or will you need to count on a dust bag? Will you need to get a new vacuum that suits your new machine?

Is The engine on the saw you’re thinking about belt or direct drive? Does This version have soft start, digital speed control or variable rate? Is the engine big enough for the jobs which will be introduced to it? How How Much does the instrument weigh (for portability)? How is the cable saved when The tool has been carried to the job website?